Services

We aim to provide all services of spray foam insulation. Here is one of the many services we can provide. For more information or more on what we can do please Contact Us.

What we use

HEATLOK HFO PRO

CLOSED-CELL INSULATION

HEATLOK HFO PRO LEVERAGES HONEYWELL’S SOLSTICE LIQUID BLOWING AGENT TECHNOLOGY, WHICH HAS A GWP OF 1, 99.9% LOWER THAN TRADITIONAL BLOWING AGENTS. IN COMPLIANCE WITH MONTREAL PROTOCOL DESIGNED TO LOWER THE USE OF GLOBAL WARMING POTENTIAL GASSES. 

SUPERIOR YEILD AND INDUSTRY LEADING R-VELUE

  • R-value of 7.4 at 1 inch
  • Complies with Montreal Protocol
  • ABAA Certified
  • NFPA 285 certified with brick, stone & masonry exterior
  • Class II vapor retarder at 1 inch
  • Exceeds ASHRAE 90.1 insulation requirements
  • Miami-Dade County, Florida NOA 19-0904.06 – Expires December 26, 2024
  • R-value =7.4/inch @ 1 inch r-11 @ 1.5 inches
  • passes nfpa 285 with brick, stone, and masonry exterior.
  • 20% yield increase and improved flame spread over heatlok soy 2000 plus
  • class II vapor retarder at 1 inch
  • 5% more recycled & renewable content than heatlok soy 200 plus

Insulate without damaging the planet. Heatlok HFO Pro is designed as a continuous insulation solution helping protect against air, thermal, water, and vapor; with superior adhesion and compressive strength. Acting as an ultra-low global warming potential blowing agent, Heatlok HFO Pro leverages Honeywell’s Solstice® Liquid Blowing Agent technology, which boasts a GWP of 1 (99.9% lower than traditional blowing agents).

HEATLOK HFO High Lift

CLOSED-CELL INSULATION

HEATLOK HFO High Lift, Demilec’s first product to leverage ultra-low Global Warming Potential blowing agent, combines an R-value of 7.5 with 6.5″ lift to achieve an R-49 in a single pass. Spray IRC Ceiling insulation code in less time than ever before!

Spray up to an R-49 in a single pass.

  • R-value of 7.5 with a 6.9” lift to achieve an R-49 in one step
  • Ultra-low global warming potential blowing agent
  • Leverages Honeywell’s Solstice® Liquid Blowing Agent technology, which has a GWP of 1. That’s 99.9% lower than traditional blowing agents
  • Low VOC emission
  • Meets the requirements for schools and healthcare facilities

Heatlok HFO High Lift leverages Honeywell’s Solstice Liquid Blowing Agent technology, which has a GWP of 1, 99.9% lower than traditional blowing agents. in compliance with the Montreal Protocol designed to lower the use of global warming potential gasses, Heatlok HFO High Lift combines all of the benefits of Heatlok with industries fourth generation of blowing agent. 

Achieve an R-49 in one step. Our first product to leverage ultra-low global warming potential blowing agent; combines an R value of 7.5 with a 6.5” lift, so you can achieve an R-49 in a single pass. Spray to IRC ceiling insulation code fast, cutting costs and labor time. And, with greater yield and sprayability, excellent adhesion and reduced gun-clogging, you can enjoy superior quality too.

SEALECTION 500

Open-CELL INSULATION

ENVIRONMENTALLY CONSCIOUS. HIGH PERFORMANCE.

Industry-leading and simple to use, Sealection 500 is the ideal insulation choice for professionals and homeowners alike. Its cutting-edge formula insulates and seals all cracks and gaps with a single application, so labor time is minimal. Also, unlike traditional applications like fiberglass, it keeps its shape and density over time. The result? A huge boost in energy efficiency, and true value for money. That’s why it’s been our flagship product for over 20 years.

Ignition barrier free for unvented attics

  • Ignition barrier free for unvented attics
  • Maintains performance throughout time and temperature
  • Allows the use of smaller HVAC systems
  • minimizes outside noise
  • reduces dust and allergens

Sealection 500 has been Demilec’s flagship product for more than 20 years. The industry leading formula of open cell spray foam insulation expands 120 times its liquid volume to insulate and seal cracks, gaps, and joints with a single application, and is easy to install and finish. it has now been tested and certified for use in unvented attics a prescribed ignition barrier. for more info consult CCRR-1063 on Demilec’s website.

The same easily applied, open cell spray foam that provides an efficient, lifelong building envelope is now certified to the same test standards as Icynene’s Classic Max and SWD’s Quik-Shield 108.

Agribalance

Open-CELL INSULATION

HIGH PERFORMANCE. MADE OF RENEWABLE CONTENT.

Quality open-cell spray foam and natural, renewable oils come together in this innovative insulation solution. A three-quarter pound density foam, Agribalance stops moisture from creeping in and keeps pollutants such as dirt and allergens locked out.

Innovation to promote a green future

  • Decreases dust and air pollutants
  • Maximizes energy efficiency 
  • Minimizes noise disturbance 
  • contains no ozone-depleting chemicals or asbestos.

This high-performance, open-cell spray foam insulation is manufactured with natural, renewable oils. Building professionals can achieve new standards in commercial,  residential, agriculture, and industrial construction.

Agribalance polyurethane insulation expands to seal cracks, gaps, and voids in attics, walls, crawl spaces, and improves energy efficiency. it also minimizes moisture intrusion and outside contaminants such as dust, dirt, and allergens. Builders can generally install smaller HVAC systems and achieve similar or superior temperature comfort levels compared to traditional insulated structures,  which require larger HVAC systems – resulting in higher energy costs.

Pour In Place

Other Foam Solutions

HIGH PERFORMANCE. MADE OF RENEWABLE CONTENT.

Quality open-cell spray foam and natural, renewable oils come together in this innovative insulation solution. A three-quarter pound density foam, Agribalance stops moisture from creeping in and keeps pollutants such as dirt and allergens locked out.

Innovation to promote a green future

PRODUCT BENEFITS
  • R-value of 3.43 at 1 inch
  • The ideal insulation solution for avoiding damage to existing structures
  • Slow rising foam
  • The liquid flows through cavities and slowly expands
FILL WITH PRECISION

Need a quality insulation solution for existing wall structures? The application process for Pour-in-Place is similar for the exterior and interior of wall systems, making it the ideal choice. Slow rising with a one-half pound density, it can also be used to insulate ceiling and floor components. It has been specially formulated to be injected through a series of drilled holes, without causing damage to the surface anchoring system. Make improvements with ease, and avoid causing damage.

 The perfect solution for insulating existing Wall structures. A slow rising spray-foam which makes building improvement easily, without causing damage.

*Information provided by Huntsman Building solutions For in depth Information on the products we use, please visit Huntsman building solutions website.

Additional Info

For additional information please contact us. For more information on the products we use please visit Huntsman Building Solutions website.